Logo box
New EU Regulation On PPE

28/02/2017

New EU Regulation On PPE

Design shape
New EU Regulation On PPE

The HSE reports that around 20,000 workers are suffering from work-related noise-induced hearing loss at any stage; when you consider those who have retired the picture is even worse, with over 70,000 people suffering from hearing loss caused by current or previous work.  Many more people face retirement unable to have a conversation in a noisy room.

The frustration with noise-induced hearing loss is that it is straightforward to prevent – don’t expose people to noise, and they won’t lose their hearing or suffer from tinnitus.  As with other hazards, reducing exposure should start by eliminating sources of noise, but once an employer has bought quieter tools and provided collective means of protection, if there is a residual risk of hearing damage, hearing protection is essential.  Whilst legislation defines action and limit values, employers should remember the overall requirement that the risk of noise exposure is reduced to as low a level as is reasonably practicable.

Under the 2002 PPE Regulations (which implemented the earlier 1989 EU Directive) three categories of PPE were defined.  Tighter controls were expected of PPE defined as “of complex design intended to protect against mortal danger or against dangers that may seriously and irreversibly harm health” with the hazard groups to which this applied listed.  These hazard groups included respiratory hazards, ionising radiation, high and low temperature environments, electrical risks and falls from height.

In March 2016, a new EU regulation on PPE was published which will come into force in April 2018.  Note that April 2018 is before the anticipated earliest BREXIT date of March 2019, and hence these new EU regulations will apply in the UK next year.  Even post-BREXIT, it is likely that the new requirements will be reflected in UK law through the Great Repeal Bill. Although BREXIT means a lot of things, it doesn’t mean we can start ignoring EU regulations.

The first thing to note is the expansion of the highest category of PPE, such that it no longer relies on “complex design” and includes additional hazard categories such as high-pressure jets, bullet wounds, knife stabs and harmful noise.  The second area of significance is that whereas the old regulations focused on requirements on manufacturers, the new regulations allocate new responsibilities to importers and distributors, who will no longer be able to rely on the claims of manufacturers for levels of hearing protection, but will need to have processes in place to demonstrate confidence in the manufacturers’ claims.

A further requirement is that examination certificates will need to be renewed at least once in five years.  Hopefully this will prompt manufacturers to keep up-to-date with the best methods of providing protection, and prompt distributors and buyers to look for the best protection available.  Hearing protection previously in the medium risk category will have to be certified to the higher category by April 2019. Requirements to mark hearing protection (or the packaging) with the attenuation provided (usually indicated by an SNR or single number rating) remain, but the previous requirement to show a “comfort index” has been removed.  The revised regulation concluded “experience has shown that it is not possible to measure and establish such an index.”

In short, the requirements for quality assurance of hearing protection will be increased, and will apply across the supply chain.  However, this will only be effective if those purchasing and using hearing protection play their part.  So, if your workers use hearing protection in the workplace, what do you need to do?

1. If you don’t already have one, create a register of all the PPE, including hearing protection, used in your workplace. Check that ear muffs include a CE mark, and that ear plugs provided have a CE marking on the packaging.

2. Check who is supplying your hearing protection – are they members of the BSiF Registered Safety Suppliers scheme or a similar independently checked organisation?

3. Do you have declarations of conformity and instructions for use for the hearing protection you currently use? If not, request this from your supplier or the manufacturer.

4. Check that the SNR value is appropriate to the noise levels people are exposed to – it can be dangerous to over-protect hearing as it results in less compliance. Remember too that the SNR is only valid when hearing protection is worn correctly, so incorporate the instructions for use into refresher training for all workers who need to wear it.

Tracking your PPE use and Training is easier when you have a system in place, and Effective Software includes modules to support you with this. Check out our PPE Management Software and Training Management Software.

Related Articles

Health & Safety News
Latest Customer Announcement

Housing

Latest Customer Announcement
Read More
20/05/2019
Health & Safety News
ISO 45001 - A year on
ISO 45001 - A year on
Read More
11/03/2019
Health & Safety News
5 Minute Guide to Modernising Health & Safety
5 Minute Guide to Modernising Health & Safety
Read More
22/02/2019